Showing posts with label linux networking. Show all posts
Showing posts with label linux networking. Show all posts

May 2, 2012

Reverse SSH Tunneling OR "Poor mans VPN"

In corporate networks , the servers will be placed behind a NAT for security reasons. Its not possible to access the server behind the NAT from outside network. And here comes a way to access servers behind NAT through SSH , its called Reverse SSH Tunneling OR Poor Mans VPN.

Scenario.

IP Address of the Server you need to access 192.168.20.55
IP Address of the Client from which you are trying 150.57.9.9


1. SSH from the destination to the source (with public ip) using command below:


ssh -R 2080:localhost:22 sourceuser@150.57.9.9

2. Now you can SSH from source to destination through SSH tuneling:

ssh localhost -p 19999


May 1, 2012

KVM (Virtualization) Tips



KVM Tips.


Assumptions

1.You should have a working KVM Environment
2.You should have knowledge in Linux and little Networking.
3.You should have basic level knowledge in Virtualisation

1.To Check whether KVM has been installed

virsh -c qemu:///system list

You will see the following...

[root@server1 ~]# virsh -c qemu:///system list
 Id Name                 State
----------------------------------

[root@server1 ~]#

Which means your KVM server is up and running.

2.To View all the running Guests

virsh --connect qemu:///system

virsh# list -all

Id Name                 State
----------------------------------
  3 vm11                 running
  - vm10                 shut off

virsh #

3.Start a Virtual Machine
virsh# start vm10

4.Stop a Virtual Machine
virsh# shutdown vm10

5.Suspend a Virtual Machine

virsh# suspend vm10

6.Forcefully Shutdown a virtual Machine (ie remove power plug)

virsh# destroy vm10

7.Exit the Virtual shell
virsh# Exit

Static Route in Linux

Static Route is using for improving the overall performance of your network. Also you can use static route for implementing Sub Networks. Suppose you are having different branch office to be connected with a Head office who is linked with a T1 line , Static route will be use full.

1.To View the routes in your system

ip route show

route -n

2.Adding a route in the Linux Machine.

route add default gw 10.10.100.1 eth0

This will create a ROUTE in the interface eth0 for a gateway to 10.10.100.1

This will be lose once you restart the network. For Adding a static route , you should follow the below steps.

vi /etc/sysconfig/network-scripts/route-eth0

Append the following

10.10.1.0/8 via 10.120.194.5

This will byepass all the traffic to 10.120.194.5 router through eth0